[Bug 1279699] Re: AER: Corrected error received: id=00e4 / PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4

Generally we should not see reproducible PCIe Correctable Errors in
significant numbers. Some have reported that "pcie_aspm=off" avoids the
errors. If that's the case for you, see
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2043665/comments/6
and help me investigate it!

--
You received this bug notification because you are subscribed to linux
in Ubuntu.
Matching subscriptions: Bgg, Bmail, Nb
https://bugs.launchpad.net/bugs/1279699

Title:
AER: Corrected error received: id=00e4 / PCIe Bus Error:
severity=Corrected, type=Physical Layer, id=00e4

Status in linux package in Ubuntu:
Confirmed

Bug description:
Description: Ubuntu 13.10
Release: 13.10 (Ubuntu 3.11.0-15.25-generic 3.11.10)

On Ubuntu 3.11.0-15.25-generic 3.11.10 I am getting the following
error:

[ 11.749109] bonding: bond0: Setting MII monitoring interval to 100.
[ 11.797258] bonding: bond1 is being created...
[ 11.797320] bonding: bond1 is being created...
[ 11.797322] bonding: bond1 is being created...
[ 11.797653] bonding: bond1 already exists.
[ 11.797658] bonding: bond1 already exists.
[ 11.808146] bonding: bond1: Setting MII monitoring interval to 100.
[ 11.824060] bonding: bond0: setting mode to 802.3ad (4).
[ 11.824063] bonding: bond1: setting mode to 802.3ad (4).
[ 11.825177] bonding: bond1: Setting LACP rate to fast (1).
[ 11.825259] bonding: bond0: Setting LACP rate to fast (1).
[ 11.825527] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready
[ 11.825674] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 11.871240] bonding: bond0: Adding slave p2p1.
[ 12.124239] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.211592] init: avahi-cups-reload main process (823) terminated with status 1
[ 12.714726] bonding: bond0: enslaving p2p1 as a backup interface with a down link.
[ 12.715620] bonding: bond1: Adding slave p4p3.
[ 13.072966] bonding: bond1: enslaving p4p3 as a backup interface with a down link.
[ 13.072970] bonding: bond1: Adding slave p4p2.
[ 13.608930] bonding: bond1: enslaving p4p2 as a backup interface with a down link.
[ 13.608934] bonding: bond0: Adding slave p3p1.
[ 13.976911] netxen_nic: p4p2 NIC Link is up
[ 14.008903] netxen_nic: p4p3 NIC Link is up
[ 14.450454] bonding: bond0: enslaving p3p1 as a backup interface with a down link.
[ 14.450459] bonding: bond1: Adding slave p4p1.
[ 14.544862] bonding: bond1: enslaving p4p1 as a backup interface with a down link.
[ 14.544866] bonding: bond1: Adding slave p4p4.
[ 14.624820] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
[ 14.677889] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 14.824864] bonding: bond1: enslaving p4p4 as a backup interface with a down link.
[ 14.824871] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
[ 14.844792] bonding: bond0: link status down again after 0 ms for interface p2p1.
[ 14.862650] igb 0000:05:00.0: changing MTU from 1500 to 9000
[ 14.924798] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
[ 14.938826] igb 0000:06:00.0: changing MTU from 1500 to 9000
[ 15.024843] bonding: bond1: Warning: No 802.3ad response from the link partner for any adapters in the bond
[ 15.148767] bonding: bond1: link status definitely up for interface p4p3, 1000 Mbps full duplex.
[ 15.148770] bonding: bond1: link status definitely up for interface p4p2, 1000 Mbps full duplex.
[ 15.940783] netxen_nic: p4p1 NIC Link is up
[ 15.948787] bonding: bond1: link status definitely up for interface p4p1, 0 Mbps full duplex.
[ 17.657721] igb: p3p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.724664] bonding: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond
[ 17.724676] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 17.748653] bonding: bond0: link status definitely up for interface p3p1, 1000 Mbps full duplex.
[ 18.201714] igb: p2p1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 18.248622] bonding: bond0: link status definitely up for interface p2p1, 1000 Mbps full duplex.

[ 41.932293] pcieport 0000:00:1c.4: AER: Multiple Corrected error received: id=00e4
[ 41.932337] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
[ 41.937340] pcieport 0000:00:1c.4: device [8086:8c18] error status/mask=00000001/00002000
[ 41.942261] pcieport 0000:00:1c.4: [ 0] Receiver Error (First)

[ 538.342279] pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
[ 538.342306] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
[ 538.342763] pcieport 0000:00:1c.4: device [8086:8c18] error status/mask=00000001/00002000
[ 538.343127] pcieport 0000:00:1c.4: [ 0] Receiver Error (First)

These are new Supermicro X10SL7-F motherboards with new HP NC375T in the PCIE x8 (in x4) port.
---
AlsaDevices:
total 0
crw-rw---- 1 root audio 116, 1 Feb 13 12:00 seq
crw-rw---- 1 root audio 116, 33 Feb 13 12:00 timer
AplayDevices: Error: [Errno 2] No such file or directory
ApportVersion: 2.12.5-0ubuntu2.2
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
CRDA: Error: [Errno 2] No such file or directory
CurrentDmesg:

DistroRelease: Ubuntu 13.10
HibernationDevice: RESUME=UUID=83e4fd84-9f18-4328-ac8e-60c5e2451275
MachineType: Supermicro X10SL7-F
MarkForUpload: True
Package: linux (not installed)
PciMultimedia:

ProcEnviron:
TERM=xterm-256color
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 astdrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=4e3cc489-e68d-4a0f-965e-1211a3215e16 ro
ProcVersionSignature: Ubuntu 3.11.0-15.25-generic 3.11.10
RelatedPackageVersions:
linux-restricted-modules-3.11.0-15-generic N/A
linux-backports-modules-3.11.0-15-generic N/A
linux-firmware 1.116.2
RfKill: Error: [Errno 2] No such file or directory
Tags: saucy
Uname: Linux 3.11.0-15-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:

dmi.bios.date: 07/19/2013
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1.1
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: X10SL7-F
dmi.board.vendor: Supermicro
dmi.board.version:
L�
�.
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 17
dmi.chassis.vendor: Supermicro
dmi.chassis.version: 0123456789
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.1:bd07/19/2013:svnSupermicro:pnX10SL7-F:pvr0123456789:rvnSupermicro:rnX10SL7-F:rvrL.:cvnSupermicro:ct17:cvr0123456789:
dmi.product.name: X10SL7-F
dmi.product.version: 0123456789
dmi.sys.vendor: Supermicro

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279699/+subscriptions